The ARM® DSTREAM™ High-Performance Debug and Trace unit enables powerful software debug and optimization on any ARM processor-based hardware target.
With features such as accelerated hardware bring-up for many development platforms and open debug interface for use with third-party tools, DSTREAM is a comprehensive solution for development and debug of complex SoCs.

The Intel® System Debugger is a JTAG-based debug solution supporting in-depth debugging and tracing of Intel® Architecture-based System Software and Embedded Applications. It enables developers to debug and trace Intel® Architecture-based platforms system-wide, e.g. UEFI / firmware, System-on-Chip peripheral registers, OS kernel and drivers with full OS awareness.

The Keil ULINK family of Debug Adapters connect your PC's USB port to your target system (via JTAG or similar debug interface) and allow you to debug embedded programs running on target hardware.

The ARM® Keil® ULINKpro family can be used with the DS-5 Development Studio for software debug on popular devices based on the ARM Cortex™-M, Cortex-R and Cortex-A processor series.

An ideal fit for equipment manufacturers using off-the-shelf processor devices, the ULINKpro family enables cost efficient run-control debug on devices ranging from microcontrollers (MCU) to multicore application processors.

Keil development tools for the XC16x, C16x, and ST10 Microcontroller Architectures support every level of developer from the professional applications engineer to the student just learning about embedded software development. The industry-standard Keil C Compilers, Macro Assemblers, Debuggers, Real-time Kernels, Single-board Computers, and Emulators support the widest variety of C16x derivatives and help you get your projects completed on schedule.

Keil development tools for the 251 Microcontroller Architecture support every level of developer from the professional applications engineer to the student just learning about embedded software development. The industry-standard Keil C Compilers, Macro Assemblers, Debuggers, and Single-board Computers support all 251 derivatives and help you get your projects completed on schedule. 

Keil development tools for the 8051 Microcontroller Architecture support every level of software developer from the professional applications engineer to the student just learning about embedded software development. The industry-standard Keil C Compilers, Macro Assemblers, Debuggers, Real-time Kernels, Single-board Computers, and Emulators support all 8051 derivatives and help you get your projects completed on schedule

ARM® DS-5 Development Studio is an end-to-end tools solution for embedded software development, especially crafted by ARM to enable you to develop robust, highly optimized products based on ARM processors. Whether you are a system-on-chip (SoC) designer, a real-time firmware engineer or an Android app developer, DS-5 helps you to take full advantage of the leading edge technologies in the ARM architecture.

Intel Parallel Studio XE 2016 is a performance tool suite that boosts application speed by taking advantage of the ever increasing core count and vector registers width available in Intel® Xeon® processors and Intel® Xeon Phi™ coprocessors.

Intel® System Studio 2016 helps system and embedded developers deliver great products on Intel® architecture-based platforms. This comprehensive suite includes advanced tools and technologies to help speed delivery of energy-efficient, high-performance, smart, connected devices across wide-ranging system and embedded platforms and mobile devices.

Keil MDK is the most comprehensive software development environment for Cortex-M processor based microcontrollers.
MDK Version 5 is now split into the MDK Core and Software Packs which makes new device support and middleware updates independent from the toolchain.

This classic 6th Generation engineering device programmer gives you the flexibility to program all device types including antifuse, PLDs, FPGAs, flash memory and more. Plus, our team of device support engineers works with over 190 semiconductor manufacturers to continuously add new certified algorithms so that you have the support you need. The 1610 currently supports over 40,000 devices.

his manual universal programmer was manufactured to support engineers early in their design cycle as well as for low volume production jobs. With the 1710, you have the ability to program FPGAs, PLDs, antifuse, flash memory, microcontrollers, E/EPROMs and more in all package styles and pin counts right on your desktop. With proven high-quality programming capabilities, the 1710 is certain to meet your device programming requirements.

We combined our powerful Vector Engine Co-Processor®, capable of achieving an amazing peak operating rate of 24Gbits per second, with true universal device support for MCUs, managed NAND, flash memory and more to give you the ultimate solution to your device programming requirements.

EM100Pro is DediProg Serial Flash Emulator based on RAM memory in order to offer the best update performances. This advanced tool has been designed in close cooperation with the Serial Flash suppliers to emulate the behaviors of all the market Serial Flash and also the next generation Serial Flash.

The SF100 is a high speed "In System Programming" programmer to update the SPI Flash soldered on board or Freescale MCU using Ezport. The programmer is easily controlled by the computer DediProg Software through the USB bus offering friendly interface and powerful features to users.

The SF600 is a high speed "in System Programming" programmer to update the SPI Flash soldered on board (In Circuit Programming) or in the socket adaptor (Off line programming). The programmer is easily controlled by the computer DediProg Software through the USB bus offering friendly interface and powerful features to users.
SF600 combines the advantages of SF100 with additional improvements:- High speed USB - Higher SPI performances - Support Single, Dual and Quad IO (ISP mode only).

ProgMaster-U8 is a new generation universal gang programmer with ultra high speed and it completely can support all IC families on the market. Equipped with 8 programming sites. ProgMaster-U8 has been designed and optimized to reach the IC maximum performances without compromise on the programming quality, stability and reliability making it the best value for mass production.

The ARM® DSTREAM™ High-Performance Debug and Trace unit enables powerful software debug and optimization on any ARM processor-based hardware target.
With features such as accelerated hardware bring-up for many development platforms and open debug interface for use with third-party tools, DSTREAM is a comprehensive solution for development and debug of complex SoCs.

When paired with DS-5 Streamline the ARM® Energy Probe provides a simple and elegant solution for software optimization targeting energy efficiency. Measure real power consumption, correlate it with software execution and make your code as efficient as the processor it's running on.

The ARM® Keil® ULINKpro family can be used with the DS-5 Development Studio for software debug on popular devices based on the ARM Cortex™-M, Cortex-R and Cortex-A processor series.

An ideal fit for equipment manufacturers using off-the-shelf processor devices, the ULINKpro family enables cost efficient run-control debug on devices ranging from microcontrollers (MCU) to multicore application processors.

Dezyne is a new generation of model-driven software engineering tools that enables software engineers to create, explore and formally verify designs for state based, event driven or concurrent software systems. It leads to generated code that is robust, reliable and trustworthy. The results include a 50% reduction in development costs, 20% decrease in time to market and a 25% reduction in the cost of field defects.

Crank Storyboard Browser is an extension of Storyboard Suite with a WebKit-based HTML5 render engine that allows designers and developers to bring HTML5 content directly into a Storyboard Application and deploy it on an embedded target.

Crank Storyboard™ Designer enables user interface (UI) designers to easily prototype the look and feel of a product, and then move the UI prototype directly to the embedded target for deployment.

Designers maintain full control over the UI and user experience (UX) without having to perform a hand off to an embedded systems engineer.